Variety of overall heights
|
Overall height(A):
|
|
Combine:
Overall height matrix of mounting plates / mounting brackets
|
Mounting plate (C)
(not predrilled)
|
Overall height (A)
(with mounting brackets (B) in a height of)
|
Type |
Height |
128 mm |
150 mm |
185 mm |
225 mm |
250 mm |
| MP 486(1) |
12 mm |
140 mm |
- |
- |
- |
- |
| MP 300(2) |
12 mm |
- |
162 mm |
197 mm |
237 mm |
262 mm |
| MP 106(2) |
22 mm |
- |
172 mm |
207 mm |
247 mm |
272 mm |
| MP 060(2) |
40 mm |
- |
190 mm |
225 mm |
265 mm |
290 mm |
| MP 331(3) |
100 mm |
- |
250 mm |
285 mm |
325 mm |
350 mm |
| MP 455(4) |
150 mm |
- |
300 mm |
335 mm |
375 mm |
400 mm |
| |
|
|
|
|
|
|
| Slider |
|
| SK-V 20 |
35 mm |
- |
185 mm |
220 mm |
260 mm |
285 mm |
Mounting plates and sliders also available with predrilles hole patterns.
(1) = Tilt angle to ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486.
(2) = Mounting plates also available in a width of 1060 mm.
(3) = Designed for fifth wheels with a imposed load up to 16 000 kg (D-value: 108 kN).
(4) = Designed for fifth wheels with a imposed load up to 15 000 kg (D-value: 108 kN).
Mounting plates and kits
Mounting plates are for connecting fifth wheels to the vehicle. They must be firmly connected to the frame construction of the tractor.
SAF-HOLLAND mounting plates enable the optimum use of the permissible overall height of commercial vehicles.
- Mounting plates without pre-drilled holes
- Mounting plates with pre-drilled holes
- Mounting kits
- Made of high grade, weldable steel plate
- Wide range, optimal design for all tractor and fifth wheels
- 7 individual mounting plate heights: 12, 16,22,40, 50, 100 and 150 mm
- The combinations of mounting plates and fifth wheels enable 23 different total overall heights, thereby covering all requirements from the lowest to the highest construction type
- Approved for forced steering
- Mounting hole pattern according to DIN 74081, 74084 and ISO 3842
- Wider range of application due to higher imposed load and higher D-value
- Type approved
Features and Benefits
|
|
Product highlights
- Made of the best quality sheet steel.
- Large range, optimal design for all tractors and fifth wheels.
- The combinations of mounting plates and fifth wheels allow 23 different total overall heights and thereby cover all needs from the lowest to the highest construction type.
|
|
|
Simple to mount
- Mounting hole pattern according to
DIN 74081 and ISO 3842
- Mounting plates with OEM hole pattern in frame: On request, our mounting plates are pre-equipped with the corresponding frame hole pattern as specified by the vehicle manufacturer.
|
|
|
Mounting kits - Delivered in the correct set
For fixing your fifth wheel and mounting plate on the vehicle's auxiliary frame, you require a special mounting set.
|
Slider SK-V 20
Sliders allow optimal utilisation of permissible axle loads and vehicle lengths.
They enable the coupling point of tractors to be changed quickly and easily. The fifth wheel can be secured in 14 different longitudinal positions, allowing the coupling of semi-trailers with different kingpin positions.
The slotted base rails with teeth and slotted rails are mounted directly to the supporting frame of the tractor. The carriage with the locking mechanism is designed for mounting fifth wheels with an overall height of 150-250 mm.
Features and Benefits
Technical data
- Direct mounting on vehicle frame
- Imposed load: 18 t
- D-value: 135 kN
- High rigidity - lightweight
- Overall height of only 35 mm
- 14 selectable coupling points, total slider travel of 525 mm
- Available in 2 different widths
- Single handed operation, optional pneumatic version available
- KTL anti-corrosion coating
- Approved for forced steering
- Mounting hole pattern according to DIN 74081, 74084 and ISO 3842
|
|
|
Easy and quick
The carriage with the locking mechanism was designed for mounting fifth wheels with hole patterns for overall heights of 150-250 mm.
- Single-handed operation
- Total slide travel of 525 mm
- High rigidity, but very low weight
- KTL anti corrosion coating
- Low overall height of only 35 mm
- Two different mounting widths
|
Convenient pneumatic operation by remote control
The remote control model of the SK-V 20 slider enables the optional coupling point to be adjusted quickly and conveniently. The adjusting mechanism of the slider carriage can be unlocked and moved via a pneumatic cylinder at the touch of a button in the driver`s cab.
- Reduced vehicle wear and tear
- Increased safety for the driver
- Convenient and quick adjustment
- Operating switch in driver`s cab
- Imposed load: 18 t
- D-value: 135 kN
|
|
|
Direct mounting
Both sides of the toothed strip are directly connected (force-fitted) to the auxiliary frame of the tractor trailer combination.
|
|
|
Mounting kits - Delivered in the correct set
To fix the slider to the vehicle's auxiliary frame, you require a mounting set specified by the manufacturer.
|
|
|