GF SK-HD 38.36

GF SK-HD 38.36

The cast 36-tonnes fifth wheel for transporting heavy loads.
• Lock size: 2" / 3½"
• Overall height: 150 / 190 mm
• Imposed load: 23 / 36 t
• D-value: 162 / 260 kN
• Weight: 185 kg

Heavy Duty Series

GF SK-HD 38.36

The fifth wheel SK-HD 38.36 was designed for the transport of imposed loads of up to 36 tonnes.

A highly robust cast steel coupling plate is fitted on durable, maintenance-free bearings. It is possible to choose between 3½" and 2". The later conversion is just as easily possible as readjusting the clearance at the lock.

Permanent, maintenance-free bearings

Conversion from 3½" to 2" and vice versa possible

Simple adjustment of locking mechanism

Suitable for steering wedge applications

Special pneumatically operated version for harbour application

Variety of overall heights

Overall height(A):

Combine:

Mounting brackets(B):
Mounting plate(C):

Overall height matrix of mounting plates / mounting brackets

Mounting plate (C) (not predrilled)		Overall height (A) (with mounting brackets (B) in a height of)
Type	Height	128 mm	150 mm	185 mm	225 mm	250 mm
MP 486(1)	12 mm	140 mm	-	-	-	-
MP 300(2)	12 mm	-	162 mm	197 mm	237 mm	262 mm
MP 106(2)	22 mm	-	172 mm	207 mm	247 mm	272 mm
MP 060(2)	40 mm	-	190 mm	225 mm	265 mm	290 mm
MP 331(3)	100 mm	-	250 mm	285 mm	325 mm	350 mm
MP 455(4)	150 mm	-	300 mm	335 mm	375 mm	400 mm

Slider
SK-V 20	35 mm	-	185 mm	220 mm	260 mm	285 mm

Mounting plates and sliders also available with predrilles hole patterns.

(1) = Tilt angle to ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486.
(2) = Mounting plates also available in a width of 1060 mm.
(3) = Designed for fifth wheels with a imposed load up to 16 000 kg (D-value: 108 kN).
(4) = Designed for fifth wheels with a imposed load up to 15 000 kg (D-value: 108 kN).

Back to: GF SK-HD 38.36

Mounting plates and kits

Mounting plates are for connecting fifth wheels to the vehicle. They must be firmly connected to the frame construction of the tractor.

SAF-HOLLAND mounting plates enable the optimum use of the permissible overall height of commercial vehicles.

- Mounting plates without pre-drilled holes
- Mounting plates with pre-drilled holes
- Mounting kits

Made of high grade, weldable steel plate

Wide range, optimal design for all tractor and fifth wheels

7 individual mounting plate heights: 12, 16,22,40, 50, 100 and 150 mm

The combinations of mounting plates and fifth wheels enable 23 different total overall heights, thereby covering all requirements from the lowest to the highest construction type

Approved for forced steering

Mounting hole pattern according to DIN 74081, 74084 and ISO 3842

Wider range of application due to higher imposed load and higher D-value

Type approved

Features and Benefits

Product highlights

Made of the best quality sheet steel.

Large range, optimal design for all tractors and fifth wheels.

The combinations of mounting plates and fifth wheels allow 23 different total overall heights and thereby cover all needs from the lowest to the highest construction type.

Simple to mount

Mounting hole pattern according to
DIN 74081 and ISO 3842

Mounting plates with OEM hole pattern in frame: On request, our mounting plates are pre-equipped with the corresponding frame hole pattern as specified by the vehicle manufacturer.